Family-owned in Texas since 1984Serving homeowners across Dallas–Fort Worth
Tall full-view custom storm door over a dark green entry door on a tan brick Texas ranch house

Who Makes Custom Size Storm Doors Near Me?

Custom size storm doors are built by a handful of manufacturers and sold through dealers, big-box special orders and local installers. Here is how to tell which one fits your opening, how to measure, and what to check before you order.

Custom storm doors in Texas are built by manufacturers such as Larson, ProVia and Casco, and you buy them through a dealer, a big-box special order or a local installer. A custom size storm door is one built to the exact measurements of your opening instead of cut from a stock width.

A custom size storm door should look like it came with the house, with even reveals on all four sides.

The short answer

  • Custom storm doors are built by manufacturers such as Larson, ProVia and Casco, and most homeowners get one through a dealer, a big-box special order or a local installer.
  • You only need a custom size when your opening falls outside stock ranges, such as a width under 31 or over 37 inches, a height under 78 or over 83 inches, an arched top, or a frame out of square by more than a quarter inch.
  • Measure the opening in several places, use the narrowest width and shortest height, and check that the trim leaves a flat mounting surface before anything is ordered.
  • Custom lead times are measured in weeks, with one dealer listing 3 to 4 weeks and a trade guide citing 4 to 8 weeks, so ask for a delivery date in writing.
  • On a west or south entry in DFW, a full-glass custom door in front of a dark entry door can trap heat, and some entry door warranties may exclude that damage, so choose tint, vented or partial-view options.

Who makes custom size storm doors, and who can order one in Texas?

Three kinds of businesses are involved. Manufacturers such as Larson, ProVia and Casco build the door. Dealers and installers order it, measure for it and hang it. Big-box stores can sometimes special order one. Most manufacturers sell through dealers rather than to homeowners, so the real choice is which seller you trust to measure.

Each maker has its own limits. ProVia says it offers custom heights up to 8 feet. Larson offers custom sizes for non-standard doorways. Casco lists custom sizes with a maximum of 48 inches wide and 96 inches high. Anyone shopping for custom storm doors in Texas ends up choosing among these catalogs, whichever seller handles the order.

Where you orderWhat they doGood forWatch for
Local installer or dealerOrders from a manufacturer, measures, installs and handles callbacksOdd, tall or out-of-square openings where fit matters more than speedAsk which manufacturer builds the door and who is responsible if a measurement is wrong
Big-box special orderSome stores can special order a custom size, often with a longer waitSimple custom rectangles when you can measure well yourselfAsk the store directly. Availability varies, and a measuring error is usually yours
Manufacturer or online dealerBuilds the door to your numbers and ships itConfident DIY owners with a square openingNo one on site to catch a bad trim or frame problem

If you are still deciding whether a storm door suits your house at all, start with our post on whether storm doors make sense in Texas. Longhorn Outdoor Living installs storm doors, and we start from the opening, not the catalog.

Do you actually need a custom size storm door?

You need a custom size only when your opening falls outside what stock doors cover. One trade guide puts that at a width under 31 or over 37 inches, a height under 78 or over 83 inches, an arched top, or a frame out of square by more than a quarter inch.

  • Tall entries. An 8-foot opening can show up on newer two-story foyers, and it is why people search for a tall storm door in Dallas.
  • Double or French entries. ProVia lists French storm door options, so a pair of doors does not have to mean one oversized door.
  • Older homes. Openings cut decades ago often miss modern stock widths.
  • Arched or out-of-square frames. Both are outside what a stock rectangle can seal.

Here is the honest part. If your opening sits inside those ranges and is square, a stock door will usually be cheaper, faster and just as tight. Do not order custom just because a seller offers it. Measure first, and let the numbers decide.

How do you measure for a custom storm door?

Measure the opening in several places and use the smallest number. Larson publishes a tape measure guide for storm door projects, and the standard method is to take three width measurements and record the narrowest. The same logic applies to height. Then check the trim, because the door needs a flat surface to mount on.

  1. Width: measure across the opening at the top, middle and bottom. Write down the narrowest.
  2. Height: measure at the left, center and right. Write down the shortest.
  3. Square: measure both diagonals corner to corner. If they differ by more than a quarter inch, tell whoever orders the door.
  4. Trim: check the flat trim width and depth. Andersen, for one, requires at least 3/4 inch of flat trim, 1 inch of brickmould depth and 2.5 inches of jamb depth. Other makers publish their own numbers.
  5. Hinge side: stand outside and note which side the hinge goes on.
  6. Photos: take pictures of the trim, the sill and the strike side so the seller can spot problems.
Hand hooking a tape measure on the sill to measure door opening height

Some DFW brick homes have narrow trim around the door, and that can leave too little flat surface for the storm door frame. If yours is shallow, ask the installer how they will build a mounting surface before you order. A vague answer like “we’ll make it work” is not a plan.

What moves the price of a custom size storm door?

Size, glass and options move the price, and the national figures published online disagree too much to trust. Third-party guides give widely different numbers for custom sizing, so we will not print one here. A written quote from a measured opening is the only number that counts.

  • Width and height. Tall doors use more aluminum and heavier glass.
  • Glass type. Large custom sashes may need acrylic instead of tempered glass, which changes the build.
  • Frame color and finish. Stock colors usually cost less than special colors.
  • Options. Retractable screens, pet doors, tint and security versions all add cost.
  • Measuring. Some fabricators charge for a measuring visit, so ask.
  • Installation difficulty. Out-of-square frames and shallow trim mean extra labor.

The alternative to a custom door is rebuilding the opening so a stock door fits. That is carpentry plus finish work, so ask for both quotes before deciding. A custom door also leaves the existing trim and brick untouched.

How long does a custom storm door take to arrive?

Expect weeks, not days. One online storm door dealer lists standard doors shipping in 10 to 14 business days and custom size doors in 3 to 4 weeks. A trade guide puts a simple custom rectangle at 4 to 8 weeks. Ask your seller for a delivery date in writing.

Those are national dealer figures, not DFW promises. A local installer who orders from the same manufacturers will be on the same factory schedule. What a local seller can add is a measuring visit and a firm install date once the door arrives.

Will a custom storm door hurt your entry door in DFW sun?

It can, if you order full-view glass for a west or south entry with a dark door behind it. The space between the two doors traps heat, and some manufacturers exclude storm door damage on a sunny exposure from the entry door warranty. Custom sizing does not cause that, but it makes it easy to order the wrong glass.

DFW summers bring weeks of triple-digit afternoons, and a west-facing porch is where an entry door feels it first. ProVia says its storm doors can be tinted bronze, green, gray or blue to cut UV and heat, and it notes that high-sun entries are not ideally suited to low-E glass. Our posts on storm doors in Texas and fiberglass entry doors in Dallas cover that heat risk in more detail.

  • Tinted glass in one of the shades ProVia lists.
  • A mid-view or high-view door with a smaller glass panel.
  • A retractable screen so the glass can open up.
  • A lighter frame color, and a lighter entry door where you can choose it.
  • Read your entry door warranty before you order, not after.
Bronze-tinted custom storm door on a west-facing brick entry in late afternoon Texas sun
On a west entry, tint or a smaller glass panel keeps the space between the two doors cooler.

What are the size and glass limits on custom storm doors?

Every maker caps what it will build. Casco lists a maximum of 48 inches wide and 96 inches high, and ProVia offers custom heights up to 8 feet. ProVia also says acrylic is required instead of tempered glass when a custom sash is over 20 square feet or 36 pounds.

If your opening is wider than one door can span, ask for a double or French storm door built as a pair. If your frame is arched or has odd angles, say so on the first call. Not every maker builds those shapes.

Should you fix the frame first or order a custom door to fit it?

Fix the frame first if it is rotted, soft or badly racked. A custom door can follow a slightly out-of-square opening, but it cannot hold screws in rotten wood. Replace the damaged trim, then measure.

In much of Dallas and the areas to the north and east, such as Plano and Garland, houses sit on Blackland Prairie clay that swells in wet springs and shrinks through August. Door frames are one of the first places a house shows that movement, the same soil movement behind cracked DFW patio slabs. A door that sticks in August and frees up in the cooler months is often a soil story, not a hinge story. West of the Trinity, Fort Worth’s limestone-based soils tend to move less, but older frames there have their own settling and rot.

Does it change in Grapevine, Coppell, Plano or Fort Worth?

The measuring, lead time and heat rules are the same across DFW. What changes is the soil under the house and the age of the opening. Grapevine sits in the Eastern Cross Timbers on sandy soil, Plano on Blackland clay, and Fort Worth on thin soil over limestone.

Longhorn Outdoor Living serves homeowners in Fort Worth and Arlington and across the metro. For storm door options and a quote, start at our storm doors page. Check with your city for any permit rules, and ask your HOA about color or style rules before you order.

What should you ask before you order a custom storm door?

  1. Which manufacturer builds it, and which model?
  2. Who measures, and who pays if the measurement is wrong?
  3. What is the delivery date, in writing?
  4. What glass and tint does it have for my exposure?
  5. Does it affect my entry door warranty?
  6. Does the price include trim work and installation?
  7. Does my HOA need to approve it?

Our crew has been building in DFW since 1984, and we would rather measure your opening in person than quote from a phone photo. A good installer will tell you when a stock door is enough.

Thinking about this for your own home? See how Longhorn builds doors.

Questions we get asked about this

Manufacturers such as Larson, ProVia and Casco build custom size storm doors. ProVia offers custom heights up to 8 feet, and Casco lists a maximum of 48 by 96 inches. Most homeowners buy through a dealer, big-box special order or local installer rather than direct from the factory.

Yes. Manufacturers build to size for tall, wide, double and out-of-square openings, and local installers order and fit them. Limits depend on the maker, such as Casco’s 48 by 96 inch maximum. Sellers in Dallas and Fort Worth measure the opening first, then place the order.

Plan on weeks. One online dealer lists custom size doors at 3 to 4 weeks, against 10 to 14 business days for standard sizes. A trade guide cites 4 to 8 weeks for a simple custom rectangle. Ask for a delivery date in writing before you pay a deposit.

Sometimes. Big-box stores may be able to special order a custom size, but availability and lead times vary by store and manufacturer, so ask directly. Also ask who is responsible if the measurement is wrong, since that is usually the buyer.

Only if your opening is outside stock ranges, such as a width under 31 or over 37 inches, a height under 78 or over 83 inches, an arched top, or a frame out of square by more than a quarter inch. If your opening is standard and square, a stock door is usually faster and costs less.

It can. A full-glass door in front of a dark entry door on a west or south face traps heat, and some warranties exclude that damage. Choose tint, a smaller glass panel or a retractable screen, and read the entry door warranty first.

Want Your Opening Measured Before You Order?

Tell us what you have in mind and we will come measure, talk options and give you a straight number. No obligation, no pressure.

Call (972) 534-2716

Get Your Free Estimate

4.8 on Google from 22 reviewsFamily-owned since 1984

Please enter your name.
Enter a 10-digit US phone number.
Use 5 digits.
Please enter your street address.
Please choose what you’re planning.
Please choose an image under 8 MB.

Thanks, we’ve got it

Here is what happens next:

  1. We call you within one business day.
  2. Free on-site visit to measure and talk options.
  3. A firm written quote. No obligation.

Need us sooner? Call (972) 534-2716.

Call Get a Free Quote